BMW 05 3 Bedienungshandbuch PDF herunterladen (Seite 57)

Driving

56

Increasing desired speed

Tap the lever repeatedly to the resistance point

or beyond, arrow 1, until the desired speed is

reached.

> Each time the lever is tapped to the resis-

tance point, the desired speed is increased

by approx. 1 mph or 1 km/h.

> Each time the lever is tapped beyond the

resistance point, the desired speed is

increased to the next multiple of 5 mph or

10 km/h until a maximum of 110 mph or

180 km⁄h is reached.

The system stores and maintains the speed.

Accelerating using the lever

Accelerating slightly:

Press the lever to the resistance point, arrow 1,

until the desired speed is reached.

Accelerating significantly:

Press the lever beyond the resistance point,

arrow 1, until the desired speed is reached.

The vehicle accelerates without pressure on

the accelerator pedal. The system stores and

maintains the speed.

Decreasing desired speed

Pull the lever repeatedly to the resistance point

or beyond, arrow 2, until the desired speed is

reached.

> Each time the lever is pulled to the resis-

tance point, the desired speed is decreased

by approx. 1 mph or 1 km/h.

> Each time the lever is pulled back beyond

the resistance point, the desired speed is

decreased to the next multiple of 5 mph or

10 km/h until the minimum speed of

20 mph/30 km/h is reached.

The system stores and maintains the speed.

If the speed is to be reduced significantly,

press the brake pedal; otherwise, decel-

eration may be insufficient and dangerous situ-

ations could result.<

Deactivating cruise control

Tap the lever upwards or downwards, arrow 3.

The displays in the speedometer disappear.

In addition, the system is automatically deacti-

vated:

> When you brake the vehicle

> When you switch gears very slowly or

engage neutral gear in cars with manual

transmission

> When you select the automatic transmis-

sion's neutral position N

> When you activate the Dynamic Traction

Control DTC

> When you deactivate the Dynamic Stability

Control DSC

> When DSC or ABS is intervening

Cruise control is not deactivated by depressing

the accelerator pedal. Once the accelerator

pedal is released, the stored speed is achieved

again and maintained.

Warning lamp

The warning lamp comes on when

cruise control has been automatically

deactivated by pressing the brake

pedal, engaging the handbrake or as a result of

DSC intervening. A message appears on the

Control Display.

Resuming a speed stored beforehand

Press button 4 briefly: the stored speed is

resumed and maintained.

In the following instances, the stored speed is

deleted and can no longer be resumed:

> When driving control systems are interven-

ing

> In cars with manual transmission: when you

shift gears very slowly or engage neutral

gear

> In cars with automatic transmission: when

you engage selector lever position N

> When the ignition is switched off

Online Edition for Part-No. 01 41 0 159 259 - © 03/05 BMW AG

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 222 223

Kommentare zu diesen Handbüchern

Keine Kommentare