BMW 05 3 Bedienungshandbuch PDF herunterladen (Seite 184)

Mobility

183

Reference At a glanceControlsDriving tipsCommunications NavigationEntertainment

> "Please observe recalculated service inter-

val for engine oil"

Do not add engine oil. You can continue

your journey. Note the newly calculated dis-

tance remaining to the next oil service, refer

to page 185. Have the system checked as

soon as possible.

Adding engine oil

Do not add the maximum amount of

1.1 US quarts/1 liter of engine oil until a corre-

sponding message is shown on the Control Dis-

play.

Add oil within the next 125 miles/200 km,

otherwise the engine could be dam-

aged.<

Keep oils, greases, etc. out of the reach of

children and comply with the warnings on

the containers. Otherwise, health hazards may

result.<

Oil change

Have oil changed only at your BMW center or at

a workshop that works according to BMW

repair procedures with correspondingly trained

personnel.

Specified engine oils

The quality of the engine oil selected has critical

significance for the operation and service life of

an engine. BMW continuously approves spe-

cific oils after confirming their suitability for use

in its vehicles with extensive testing.

Use only approved BMW High Performance

Synthetic Oil.

If you are unable to obtain BMW High Perfor-

mance Synthetic Oil, you can add small

amounts of another synthetic oil between oil

changes. Use only oils with the API SH specifi-

cation or higher.

Ask your BMW center for details concern-

ing the specific BMW High Performance

Synthetic Oil or synthetic oils which have been

approved.<

You can also call BMW of North America

at 1-800-831-1117 or visit this website:

www.bmwusa.com to obtain this information.

Viscosity ratings

Viscosity is the oil flow rating as defined in SAE

classes.

The selection of the correct SAE class depends

on the climatic conditions in the area where you

typically drive your BMW.

Approved oils are in SAE classes 5W-40

and 5W-30.<

These oils may be used for driving in all ambient

temperatures.

Coolant

Do not add coolant to the cooling system

when the engine is hot. Escaping coolant

can cause burns.<

Coolant is a mixture of water and an additive.

Not all commercially available additives are suit-

able for your BMW. Ask your BMW center for

suitable additives.

Only use suitable additives, as otherwise

engine damage may result. The additives

are hazardous to your health.<

Comply with the appropriate environ-

mental protection regulations when dis-

posing of coolant additives.<

Checking coolant level

1. The engine must be at ambient tempera-

ture.

2. Turn the cap of the expansion tank counter-

clockwise to allow any accumulated pres-

sure to escape, then continue turning to

open.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 222 223

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW 05 3 Bedienungshandbuch Seite 184

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone BMW 05 3