BMW ONBOARD COMPUTER Wartungshandbuch PDF herunterladen (Seite 89)

Force the brake pads 1 slightly

apart by rocking brake caliper 2

back and forth against brake

disc 3.

Mask off the parts of the wheel

rim that could be scratched in

the process of removing the

brake calipers.

Carefully pull the brake calipers

back and out until clear of the

brake discs.

Place the motorcycle on an

auxiliary stand; BMW Motorrad

recommends the BMW Motor-

rad rear-wheel stand.

Installing the rear-wheel stand

( 92).

with centre stand

Make sure the ground is level

and firm and place the motor-

cycle on its centre stand.

Raise front of motorcycle until

the front wheel can turn freely.

BMW Motorrad recommends

the BMW Motorrad front-wheel

stand for lifting the motorcycle.

Install the front-wheel stand

( 90).

Slacken axle clamping

screws 1.

Remove quick-release axle 2,

while supporting the wheel.

Roll the front wheel forward to

remove.

Remove spacing bushing 1

from the left-hand side of the

wheel hub.

Installing front wheel

Malfunctions are possible

when the ABS system in-

tervenes if non-standard wheels

are installed.

See the information on the effect

of wheel size on the ABS system

at the start of this chapter.

Maintenance

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW ONBOARD COMPUTER Wartungshandbuch Seite 89

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für PC / Workstation Barebones BMW ONBOARD COMPUTER