BMW ONBOARD COMPUTER Wartungshandbuch Seite 87

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 148
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 86
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Wear indicators are built
into the main profile
grooves on each tyre. The tyre
is worn out when the tyre tread
has worn down to the level of
the marks. The locations of the
marks are indicated on the edge
of the tyre, e.g. by the letters TI,
TWI or by an arrow.
If the tyre tread is worn to min-
imum:
Replace tyre or tyres, as applic-
able.
Wheels
Tyre recommendation
For each size of tyre BMW
Motorrad tests certain makes,
and approves those that it
certifies as roadworthy. If BMW
Motorrad has not approved the
wheels and tyres, it cannot
assess their suitability or provide
any guarantee of road safety.
Use only wheels and tyres ap-
proved by BMW Motorrad for
your type of motorcycle.
You can obtain detailed informa-
tion from your authorised BMW
Motorrad dealer or on the Inter-
net at www.bmw-motorrad.com.
Effect of wheel size on
ABS
The wheel size has a large in-
fluence on the functionality of
the ABS system. In particular,
the diameter and the width of a
vehicle's wheels are programmed
into the control unit and are fun-
damental to all calculations. Any
change in these influencing vari-
ables, caused for example by a
switch to non-standard installed
wheels, can have serious effects
on the performance of the con-
trol systems.
The sensor rings are essential
for correct road-speed calcula-
tion, and they too must match
the motorcycle's control sys-
tems and consequently cannot
be changed.
If you decide that you would like
to fit non-standard wheels to
your motorcycle, it is very im-
portant to consult a specialist
workshop beforehand, prefer-
ably an authorised BMW Motor-
rad dealer. In some cases, the
data programmed into the control
units can be changed to suit the
new wheel sizes.
7
85
z
Maintenance
Seitenansicht 86
1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare