BMW ONBOARD COMPUTER Wartungshandbuch PDF herunterladen (Seite 54)

Press button 1 to view the cur-

rent setting.

To make different adjustment to

the damping:

Repeatedly press button 1 until

the setting you want to use

appears on the multifunction

display.

You can adjust the damping

characteristic while the mo-

torcycle is on the move.

The setting shown on the dis-

play is automatically accepted

as the damping characteristic

if you allow a certain length of

time to pass without pressing

button 1.

The ESA indicator disappears

from the display as soon as

adjustment completes.

Tyres

Checking tyre pressure

Incorrect tyre pressures im-

pair the motorcycle's hand-

ling characteristics and increase

the rate of tyre wear.

Always check that the tyre pres-

sures are correct.

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Check tyre pressures against

the data below.

Tyre pressure, front

2.5 bar (Tyre cold)

Tyre pressure, rear

2.9 bar (Tyre cold)

If tyre pressure is incorrect:

Correct tyre pressure.

Headlight

Adjusting headlight for

driving on left/driving on

right

If the motorcycle is ridden in a

country where the opposite rule

of the road applies, its asymmet-

ric low-beam headlight will tend

to dazzle oncoming traffic.

Have the headlight set accord-

ingly by a specialist workshop,

preferably an authorised BMW

Motorrad dealer.

Commercially available ad-

hesive tape will damage the

plastic lens of the light.

Consult a specialist workshop,

4

52

z

Operation

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 147 148

Kommentare zu diesen Handbüchern

Keine Kommentare