Removing cases
Turn the key 1 to position
RELEASE.
Pull the black release lever 1
(RELEASE) up and simultan-
eously pull the case out.
Then lift the case out of the
bottom holder.
Installing cases
Turn the key 1 to position
RELEASE.
Position the case in case
holder 1, then pivot it until it is
seated at mount 2.
Pull the black release lever 3
(RELEASE) up and simultan-
eously push the case into the
upper holder 2.
Push black release lever 3
(RELEASE) down until it en-
gages.
Turn the key in the case lock
so that it is parallel with the
direction of travel and remove.
8
108
z
Accessories
Kommentare zu diesen Handbüchern