BMW ONBOARD COMPUTER Wartungshandbuch Seite 96

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 155
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 95
Measure clutch play A
between the handlebar fitting
and the clutch cable.
Clutch play
1 mm (Handlebars turned
fully left, between handlebar
fitting and clutch cable)
Clutch play is out of tolerance:
Adjust the clutch play ( 94).
Adjusting clutch play
Slacken nut 3.
To increase clutch play: screw
nut 2 up.
To reduce clutch play: screw
nut 2 down.
Check the clutch play ( 93).
Repeat the steps in this pro-
cedure until clutch play is set
correctly.
Tighten nut 3.
Tyres
Checking tyre tread depth
Your motorcycle's handling
and grip can be impaired
even before the tyres wear to
the minimum tyre tread depth
permitted by law.
Have the tyres changed in good
time before they wear to the
minimum permissible tread
depth.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Measure the tyre tread depth
in the main tread grooves with
wear marks.
Tyres have wear indicators
integrated into the main
tread grooves. The tyre is worn
out when the tyre tread has worn
down to the level of the marks.
The locations of the marks are
indicated on the edge of the tyre,
e.g. by the letters TI, TWI or by
an arrow.
If the tyre tread is worn to minim-
um:
Replace tyre or tyres, as applic-
able.
Rims
Checking rims
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Visually inspect the rims for
defects.
8
94
z
Maintenance
Seitenansicht 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 154 155

Kommentare zu diesen Handbüchern

Keine Kommentare