BMW ONBOARD COMPUTER Wartungshandbuch PDF herunterladen (Seite 53)

Push the protective cap over

the threaded fastener.

Spring preload

Setting

It is essential to set spring pre-

load of the rear suspension to

suit the load carried by the mo-

torcycle. Increase spring preload

when the motorcycle is heavily

loaded and reduce spring preload

accordingly when the motorcycle

is lightly loaded.

Adjusting spring preload

for rear wheel

Remove the seat ( 54).

Remove on-board toolkit 1.

Your motorcycle's hand-

ling will suffer if you do not

match the spring-preload and

damping-characteristic settings.

Adjust the damping characteristic

to suit spring preload.

If you want to increase spring

preload, use the tool from the

on-board toolkit to turn knob 2

clockwise.

If you want to reduce spring

preload, use the tool from the

on-board toolkit to turn knob 2

counter-clockwise.

Basic setting of spring

preload, rear

Turn the adjusting screw

counter-clockwise as far as it

will go (Full load of fuel, with

rider 85 kg)

Operation

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 154 155

Keine Kommentare

BMW ONBOARD COMPUTER Wartungshandbuch Seite 53