BMW Motorrad Navigator III Bedienungshandbuch PDF herunterladen (Seite 30)

BMW Motorrad Navigator III Owner’s Manual 

aPPendix

CAUTION: Garmin is not responsible

for the consequences of using a custom

POI database or the accuracy of the

safety camera or other custom POI

database.

Finding Custom POIs

To nd the custom POIs or Garmin TourGuide

POIs loaded on your Navigator III, press the

FIND key. Touch My Locations > Custom

POIs.

Deleting Custom POIs

To delete all of the custom POIs, press the

MENU key. Touch Tools > My Data >

Custom POIs > Delete All.

Specications

Size: 5.6” W x 3.2” H x 2.0” D (14.3 x 8.0 x

5.0 cm)

Weight: 0.93 lb (420 g)

Unit Case: Rugged; fully gasketed; IPX7

waterproof

Display: Sunlight-readable, 17:9 WQVGA

automotive color TFT display with touch screen

and auto dimming; 454 pixels by 240 pixels,

Map Storage: Pre-programmed internal

memory

Temperature: 5° to 158°F (-15° to 70°C)

Power Supply

Source: 12 VDC

Usage: 12 watts maximum @ 13.8 VDC

12-volt adapter fuse: AGC/3AG - 1.0 Amp

Optional Remote Control: Two AAA alkaline

batteries (not included).

NOTE: The remote control is not waterproof.

For a complete list of specications, go to

www.garmin.com/products/BMWNavigatorIII

and click Specications.

Contact your local waste disposal department

for information on properly disposing of the

unit.

Caring for Your Navigator III

Your Navigator III contains sensitive electronic

components that can be permanently damaged

if exposed to excessive shock or vibration. To

minimize the risk of damage to your Navigator

III, avoid dropping your unit and operating it in

high-shock and high-vibration environments.

Do not store the unit where prolonged exposure

to extreme temperatures can occur (such as in

the trunk of a car), as permanent damage may

result.

Cleaning the Unit

The Navigator III is constructed of high-quality

materials and does not require user maintenance

other than cleaning. Clean the unit’s outer

casing using a cloth dampened with a mild

detergent solution. Wipe dry. Avoid chemical

cleaners and solvents that can damage plastic

components.

Caring for the Touch Screen

The touch screen is intended to be operated

with a nger. Never use a hard or sharp object

to operate the touch screen because damage can

result. Though a PDA stylus can also be used

to operate the touch screen, never attempt this

while operating a vehicle.

Clean the touch screen using a soft, clean,

lint-free cloth. Use water, isopropyl alcohol, or

eyeglass cleaner if needed. Apply the liquid to

the cloth and then gently wipe the touch screen.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare