BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch PDF herunterladen (Seite 94)

34.31

Integral ABS: Removing and install-

ing brake lines

•

Drain the brake system (a 34.16).

•

Push protective caps (1) up.

•

Remove spring clips (2).

•

Remove brake lines.

•

Installation is the reverse of the removal proce-

dure: pay particular attention to the following.

d Warning:

Always fit new spring clips each time the plugs are

disconnected. Ensure correct positioning.

e Attention:

Fit new sealing rings for brake line.

Secure brake line to master cylinder so that it can-

not become kinked or abraded when the handlebars

are turned.

L Note:

Always replace the seals (square-section rings) be-

tween the brake lines and the pressure modulator

when you replace the brake lines.

•

Carefully remove square-section rings (3) using

disassembly tool, BMW No. 34 2 561.

•

Install square-section rings with brake lines.

•

Check that square-section rings are correctly

seated.

•

Install new spring clips.

•

Slip the protective caps up the brake lines.

•

Clip in brake lines.

•

Check that spring clips are correctly positioned

(arrows).

•

Seat the protective caps on the connectors.

•

Fill and bleed the brake system (a 34.19).

X Tightening torque:

Brake hose and brake line............................ 18 Nm

Bleed screws in front brake calipers............... 7 Nm

Bleed screw in rear brake caliper................... 5 Nm

34 2 561

R28340160

1 2 ... 89 90 91 92 93 94 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch Seite 94

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorräder BMW R1150RT - MAINTENANCE INTEGRAL ABS