BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch PDF herunterladen (Seite 70)

34.7

34 21 Disassembling and assembling

rear brake caliper

Disassembling rear brake caliper

– Integral ABS Drain rear wheel circuit (a 34.17).

– Remove the brake caliper.

•

Close the bleed screw.

•

Hold a cloth over the brake caliper piston.

•

Carefully press out brake piston (3) with a com-

pressed air gun applied to the connecting bore;

work at low air pressure.

e Attention:

Keep fingers away from gap between piston and

side contact face of brake pads; risk of injury.

•

Remove sealing rings (4) from left and right

bores.

•

Inspect the brake caliper piston for hairline

cracks, score-marks and other damage.

X Tightening torque:

Bleed screw to brake caliper.......................... 5 Nm

Assembling rear brake caliper

•

Coat the new sealing rings with brake fluid and

insert them into the left and right brake caliper

bores.

•

Coat both brake caliper pistons with brake fluid

and install them.

e Attention:

Keep the brake pistons parallel with their bores

when installing.

•

Coat the adapter plate locating pins with

Shell Retinax A and install the adapter plate.

•

Insert locating plate (5) into brake caliper.

L Note:

The installed position must be correct (arrow point-

ing in forward-travel direction).

•

Using piston resetting tool, BMWNo.341531,

press the pistons fully back.

•

Integral ABS Fill and bleed rear wheel circuit

(

a 34.26).

X Tightening torque:

Brake caliper to rear wheel drive .................. 40 Nm

Brake hose to brake caliper ......................... 18 Nm

Bleed screw to brake caliper.......................... 5 Nm

R21340010

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

BMW R1150RT - MAINTENANCE INTEGRAL ABS Wartungshandbuch Seite 70

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motorräder BMW R1150RT - MAINTENANCE INTEGRAL ABS