BMW R 1100 RT Bedienungsanleitung Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 5
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
Bulletin #: 2748 Page 3
R 1100/850 Models Only
R1100RT & RSL - remove the left fairing
panel.
Adjust the choke cable (increased idle) to
1 mm (0.03937 in.) free play.
Please note the throttle butterfly stops
are set by the manufacturer using a
flow bench - do not adjust the stop
screws!
left throttle body
Throttle Cable:
Set the throttle cable free
play to approx. 0.5mm (0.0197in.) with the
handle bars at full lock.
Note:
Warm the bike on the road and
use
a fan while on the lift
to maintain proper
operating temperature when making any
adjustments. If the adjustments begin to
fluctuate, the normal operating
temperature has been exceeded. Take
the bike back out on the road, then re-
adjust.
left throttle body
Connect the BMW Synchro tool:
Check
the vacuum stub pipes for dirt and grime,
prior to connect up the BMW Synchro tool
88 88 6 13 0 800
The rise of the columns is not as important
as the balance of the columns at RPM.
The left and right columns should be as
close as possible at - idle, at 3000 RPM,
and at 5000 RPM.
Seitenansicht 2
1 2 3 4 5

Kommentare zu diesen Handbüchern

Keine Kommentare