BMW Z3 coupe Bedienungsanleitung PDF herunterladen (Seite 6)

ProjectorZ™

Installation Instructions

BMW Z3/Coupe and ///M Roadster/Coupe

6 of 8

Using a #10 Torx driver, remove the screws holding the 2 white nylon

socketed mounting points for the aiming adjusters. Do NOT alter the

aiming adjusters.

Use a straight blade screwdriver to release and remove the large black

mounting point. Retrieve the screws and screw them back into the

chrome reflector so you can find them if you ever want to go back to

stock.

This bracket has the Hellas removed for clarity. Using the pre-installed

#6-32 x 3/8” screws, mount the two white nylon ball socket mounting

points. From the same side, insert the large black side entrance ball

mount. Insert it midway. Friction will maintain its setting.

Repeat for the other headlight.

1 2 3 4 5 6 7 8

Keine Kommentare

BMW Z3 coupe Bedienungsanleitung Seite 6