BMW Z3 coupe Bedienungsanleitung PDF herunterladen (Seite 3)

ProjectorZ™

Installation Instructions

BMW Z3/Coupe and ///M Roadster/Coupe

3 of 8

4.0 Installation Procedure

Remove the 4, 8mm screws securing your headlight to the car. Pull

light forward to access and remove the low, high and parking lamp

connections.

The entire installation can be done by removing only the rear portion

of the headlight. Removing the front cover will make it easier to

position components. But the entire job can be accomplished from the

back side. This will alleviate having to remove the clear front cover.

Begin by removing all bulbs, gaskets and other items that cannot

accept heat of 200 degrees Fahrenheit (93 degrees Celsius). The glue

holding the headlight carcass needs to be softened with heat to allow

the headlight to come apart.

1 2 3 4 5 6 7 8

Keine Kommentare

BMW Z3 coupe Bedienungsanleitung Seite 3