The license plate bracket sockets into the right underside dowel and rests on top of the
ceramic coated Black Hole muffler bracket.
A 5/16” x 18 x 1” bolt, washer, lock washer and nut are provided. Tighten with 1/2”
wrenches. Be sure the two parts i.e. the muffler and the license plate bracket are seated
equally depth-wise on their respective dowels.
Note the breather tube hose to the right.
The Bracket incorporates a L.E.D. light.
The water injection reservoir will actually bolt to this bracket and the license plate will
bolt to the face of the reservoir.
BMW R1100/1150 General Turbo Instructions rbracing-rsr.com
22
Kommentare zu diesen Handbüchern