BMW R1100 Spezifikationen Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 64
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
25
Rear (GS, R, RT)
remove bags
remove keeper from pin
drive out pin from keeper side (drive toward wheel)
remove caliper bolts - 8 mm hex
remove caliper, rock back and forth on rotor to spread pads
remove old pads
grind or file EBC pads to fit (see above)
insert new pads
drive in pin
insert keeper
install caliper onto rotor
install caliper bolts, torque to 40 Nm (30 ft.lb.)
pump rear brake!!!!!
check fluid level in reservoir
Rear (RS)
same as above except:
pry off plastic caliper cover
drive out both pins from the wheel side
remove curved spring keeper from pins
Anti-rattle springs
Some riders remove the anti-rattle springs from the original OEM pads by drilling them
out and then riveting them to the new EBC pads which do not come with springs.
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare