5
Parts Required:
• CCC / Navigation head unit (p/n depends on build date & region)
• I-drive controller (p/n depends on build date & region)
• CID – Central Information Display (screen)
• Fakra 5.2m antenna extension cable (I used BMW p/n: 61126970911)– a slightly shorter one will suffice
• Double scoop dashboard (p/n depends on color)
• Center speaker grille (for double-scoop dashboard) – (p/n: 51457123750)
• Center speaker mounting bracket (p/n: 51457123751)
• Center console trim with I-drive controller hole (p/n depends on trim)
• Climate control bezel/trim for double-scoop dash (p/n depends on trim color)
• Cooling hose (p/n: 64116928875)
• CID mounting screws (qty:2, p/n: 07147133553)
• CCC mounting screws (qty:4, p/n: 65758207870 I think these are the correct p/n)
• Controller mounting screws (qty:4, p/n: 07147122390)
• CID harness (I built my own)
• Controller harness (I built my own)
• CCC Fan Harness (p/n: 61120396722 – if still available)
• LVDS Cable (p/n: 61126935686)
• Pins, wiring, and appropriate connectors to hook into the CID, controller, CCC fan, as well as into the
JBE connector. I used a chopped-up dash harness I had and was able to utilize factory wiring colors.
Correct gauge, and type of pin used. You WILL need factory pins to hook into the JBE connector.
Optional:
Zip-ties, fabric wiring-harness tape, Steering wheel switches (optional, as stock ones will
work fine but won’t have the correct labels on buttons - p/n: 61316956562), Protective strip (foam) to
wrap around both ends of LVDS cable (p/n: 61139410951) You may also need a fuse or two as well.
Tools Required:
• Trim tool (a small plastic pry-bar) – don’t even attempt working on your E90 without this tool!
• T-10 Torx Screwdriver
• T-20 Torx Screwdriver
• 8mm, 10mm, 12mm, 13mm, 16mm sockets & appropriate socket wrenches
• Various small common & Phillips screwdrivers
• Pliers and misc. common tools
• Common sense & patience!
I recommend washing your hands often (especially when working with the A-pillar trim) as to not get dirty
fingerprints on everything and try to keep your tools clean.
Kommentare zu diesen Handbüchern