ACCESSORIES & EQUIPMENTFully Automatic Convertible Top - Service Information - Cooper DESCRIPTION & OPERATION - FULLY AUTOMATIC CONVERTIBLE TO
On vehicles manufacturer from 09/2005, release the stowage lock with a screwdriver (on-board tool kit) on one side of the vehicle. Lift the guide ra
The heated rear window is actuated by a signal from the heater control panel via the general module. Condition: The convertible top is closed. The con
At least 3 people are needed for removing and installing convertible top. Convertible top is delivered in transport mode. Hydraulic pump resta
The convertible top is opened in just 15 seconds at the touch of a button (without first having to be unlocked).The convertible top has an integrated
2. Microswitch for rear shelf and microswitch for tensioning bar The microswitch for the rear shelf tells the convertible top module (CVM) whether the
Fig. 2: Locating Convertible Top Module And Relays Courtesy of BMW OF NORTH AMERICA, INC. Figure legend: 1. Convertible Top Module (CVM) 2. Relay 1
PIN ASSIGNMENT FOR 6-PIN (X13038) CONNECTOR 6. GM: General Module 3 M Earth for convertible top module4 A Actuation for relay for locking mechanism an
The General Module (GM) controls the power windows.The general module gives the convertible top module the following information through the K-bus:
Condition: The control LED in the control panel flashes red under the following conditions: Movement of the convertible top is interrupted due to a
Tensioning bar locked (signal from microswitch for tensioning bar). Temperature in hydraulic pump not exceeded (calculated in convertible top mod
Stowage lock From manufacturer date 09/2005 the following applies: When the convertible top is opened, the convertible top must be recognized as bei
Kommentare zu diesen Handbüchern