BMW On-Board Computer Wartungshandbuch PDF herunterladen (Seite 76)

Adjust headlight beam

throw

If, for a high load, the adjust-

ment of the spring pre-load is

no longer sufficient not to dazzle

oncoming traffic:

Turn adjuster knob 1 in a

counter-clockwise direction in

order to lower the headlight

beam again.

When the motorcycle is again

ridden with a lower load:

Have the basic settings of the

headlight restored by a special-

ist workshop, best of all by a

BMW Motorrad dealer.

with LED headlights

Beam throw can also be adjusted

by means of a pivot lever instead

of the adjuster knob.

To shorten beam throw for rid-

ing with the motorcycle heavily

loaded, set pivot lever 1 to the

horizontal position.

When the motorcycle is again

ridden with a lower load:

Turn pivot lever 1 to the ver-

tical position.

Front and rear seats

Removing rear seat

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Turn the key clockwise in seat

lock 1 and hold it in this pos-

ition while pressing down the

rear part of rear seat 2.

Lift the rear seat at the front

and release the key.

Remove the rear seat and

place it, upholstered side down,

on a clean surface.

Operation

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 183 184

Keine Kommentare

BMW On-Board Computer Wartungshandbuch Seite 76