BMW On-Board Computer Wartungshandbuch PDF herunterladen (Seite 75)

Off: Alarm system is deactiv-

ated.

Tyres

Checking tyre pressure

Incorrect tyre pressures im-

pair the motorcycle's hand-

ling characteristics and increase

the rate of tyre wear.

Always check that the tyre pres-

sures are correct.

At high road speeds, tyre

valves installed perpen-

dicular to the wheel rim have a

tendency to open as a result of

centrifugal force.

In order to avoid a sudden loss of

tyre pressure, fit a valve cap with

rubber sealing ring to the rear

tyre and make sure that the cap

is screwed on firmly.

Make sure the ground is level

and firm and place the motor-

cycle on its stand.

Check tyre pressures against

the data below.

Tyre pressure, front

2.5 bar (Tyre cold)

Tyre pressure, rear

2.9 bar (Tyre cold)

If tyre pressure is too low:

Correct tyre pressure.

Headlight

Adjusting headlight for

driving on left/driving on

right

This motorcycle has a

symmetric-beam low-beam

headlight. If the motorcycle

is ridden in a country where

the opposite rule of the road

applies, its symmetric low-

beam headlight means that

no measures are necessary to

prevent the headlight beam from

dazzling oncoming traffic.

Headlight beam throw and

spring preload

Headlight beam throw is gener-

ally kept constant when spring

preload is adjusted to suit load.

Spring preload adjustment might

not suffice only if the motorcycle

is very heavily loaded. Under

these circumstances, headlight

beam throw has to be adjusted

to suit the weight carried by the

motorcycle.

If there are doubts about

the correct headlight range,

seek the advice of a specialist

workshop, preferably an author-

ised BMW Motorrad dealer.

4

73

z

Operation

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare