BMW On-Board Computer Wartungshandbuch Seite 61

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 184
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 60
with riding modes
OE
Initially, the ASC symbol
changes status. Press and
hold down button 1 until the
ABS warning light responds.
Under these circumstances
there is no change in the ASC
setting.
The ABS warning light
comes on.
Release button 1 within two
seconds.
The ABS warning light re-
mains ON.
The ABS function is deactiv-
ated, but the integral function
remains active.
Response with ABS
deactivated
If you deactivate the ABS, the
function is initially disabled for
the front wheel only. If you sub-
sequently apply the brakes by
pulling only the handbrake lever,
the Integral function ensures that
the rear wheel is also braked and
ABS control remains active for
the rear wheel. ABS control for
the rear wheel is not deactivated
until you depress the footbrake
lever.
Activating ABS function
Press and hold down button 1
until the ABS warning light
changes status.
The ABS warning light
goes out; if self-diagnosis
has not completed it starts flash-
ing.
Release button 1 within two
seconds.
The ABS warning light re-
mains off or continues to
flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
An ABS fault has occurred
if the ABS warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 5 km/h after the ignition was
switched off and then on again.
Automatic Stability
Control ASC
with riding modes
OE
Deactivating ASC function
Switch on the ignition.
4
59
z
Operation
Seitenansicht 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare