BMW On-Board Computer Wartungshandbuch PDF herunterladen (Seite 57)

Press button 1 to switch on

the daytime riding lights.

The indicator light for the

daytime riding light illumin-

ates.

The low-beam headlight, the

front side lights and the auxili-

ary headlight are switched off.

In the dark or in tunnels: Press

button 1 again to switch off the

daytime riding lights and switch

on the low-beam headlight.

The auxiliary headlight is also

switched on again.

If the high beam headlight

is switched on whilst

the daytime riding light is

switched on, the daytime riding

light will be switched off after

approx. 2 seconds, and the

high beam headlight, low beam

headlight, front side lights and, if

applicable, the auxiliary headlights

will be switched on.

If the high beam headlight is

switched off again, the daytime

riding light is not automatically

reactivated, but must be

switched on again if required.

Automatic daytime riding

light

with daytime riding lights

OE

The changeover between

daytime riding light and

low beam headlight incl. front

side lights can be effected

automatically.

The automatic riding light

control system cannot re-

place your personal assessment

of lighting conditions. The light

sensor measurement may be

falsified by e. g. fog or misty

weather.

In such situations the low beam

headlight must be switched on

manually, as otherwise as safety

risk would occur.

In the SETUP menu of the

display, at the menu item

DLIGHT set the automatic

daytime riding light to ON.

The indicator light for the

automatic daytime riding

light illuminates.

If the ambient brightness de-

creases below a certain value,

the low beam headlight is auto-

matically switched on (e. B. in

a tunnel). If a sufficient ambi-

ent brightness is detected, the

daytime riding light is switched

4

55

z

Operation

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 183 184

Kommentare zu diesen Handbüchern

Keine Kommentare