Remove air filter element 2.
Fit new or cleaned air filter in-
sert 2.
Fit frame 1.
Place air filter housing cover in
position.
Install screws 1.
Place centre trim panel in po-
sition, paying attention to the
connections 1 to the side pan-
els.
Fit screws 1 and screws 2.
Installing front seat ( 75).
Jump-start
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
vehicle electronics.
Do not use the on-board socket
to jump-start the engine of the
motorcycle.
A short-circuit can res-
ult if the crocodile clips
of the jump leads are accident-
ally brought into contact with the
motorcycle.
Use only jump leads fitted with
fully insulated crocodile clips at
both ends.
Jump-starting with a donor-
battery voltage higher than
12 V can damage the vehicle
electronics.
8
136
z
Maintenance
Kommentare zu diesen Handbüchern