Remove screw 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 1 counter-clockwise
and remove it from the bulb
housing.
Installing turn-indicator
bulbs, front and rear
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Turn bulb 1 clockwise to install
it in the bulb housing.
8
134
z
Maintenance
Kommentare zu diesen Handbüchern