Install screw 1 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Quick-release axle in
telescopic forks
30 Nm
Tighten left-hand axle clamp-
ing screw 2 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Tighten right axle clamping
screw 1 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Remove the front-wheel stand.
Place brake calipers left and
right onto the brake discs.
Install securing screws 4 on
left and right and tighten to
specified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
Remove the adhesive tape
from the wheel rim.
Braking efficiency is im-
paired if the brake pads are
not correctly bedded against the
discs.
Before riding off, always check
that the brakes bite as soon as
8
127
z
Maintenance
Kommentare zu diesen Handbüchern