BMW On-Board Computer Bedienungshandbuch Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 31
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
05 RW: nnn km nnn = range in km Yes
06 Not used Yes
07 TMTL: nn,n l nn,n = fuel remaining (in liters) Yes
08 V: n km/h n = instantaneous speed in km/h Yes
09 UB: nn,nn V
nn,nn = system voltage (should be
around 13,80)
Yes
10 LAND: n xxx *
Country code — for US
should be set to 2 USA — see description
below
No
11 EINHEIT n: xx *
?? There are two EINHEIT displays: the
values for xx in EINHEIT 1 can range
between B0 and BF, and for EINHEIT 2 range
between 0F and FF (mine is set to B3 and
FF, respectively). Press the 1000 or 100 key
to switch between EINHEIT 1 and EINHEIT 2.
Yes
12 VANK nn km/h nn = average speed Yes
13 ANK: nn:nn
nn:nn = ETA (will display
–:– if the OBC’s distance function is not in
use)
Yes
14 ROM: dd.mm.yy
dd.mm.yyyy = Software version date. Mine
is 25.06.1991
No
15 DIAG: nn nn nnn xx Diagnosis code? Mine is 01 05 255 FA Yes
16 PORT: nn nnnnnnnn
Port codes? Press 1000
or 100 key to cycle port numbers. For
example, PORT 01 is 10101000
Yes
17 PROM: nn nn ?? Mine reads 00 12
Yes
18 HORN: xxxx
DTON or DTOFF?
(Single tone horn versus dual tone)
Yes
19 LOCK: xx
xx = ON or OFF.
See description above for method.
No
20 KVBR: nnnn
nnnn = Fuel rate calibration factor. Mine is
set to 1000
Yes
21 RESET?
Reset all defect codes? Also erases all stored
values in the OBC (i.e, fuel consumption,
avg. speed, timer, etc) and clock.
Yes
Note: #20 The factor is used to correct the OBC Avg Fuel Consumption figure to reality. If your OBC is off
a bit, fill it UP totally and then run the tank down and refill. Then calculate your Actual MPG. Now enter
test #20 get the old Correction Factor. NEW CF = OLD CF *(Actual MPG/OBC MPG)
Setting the Country Code:
If your OBC suddenly starts displaying every thing in German, and you would like to put it back to English,
use test sequence number 10. Once you’re into test number 10, press the 1 key several times, and you’ll
see the display cycle through various country options. For example, 0 is for Germany (the display reads
LAND:0 D * - I assume D stands for Deutschland). As you cycle through the options, you’ll see choices
for the Great Britain, USA, France, Canada, etc. Once the display is on the country you want, press the
SET/RES key to store your choice into memory — for US drivers the display should be set to LAND: 2
USA * . Then press the CHECK key, and the display will reflect the units of the country you’ve chosen.
Instrument Panel Tests:
With the engine off, press and hold the trip mileage reset button, and then turn the key to accessory
position 2 (OBC and radio come on). The LED display on the instrument panel (which normally is the
odometer) will change to tESt01 and then will begin to cycle through several displays. Release the button.
drivers
Q
Q
Seitenansicht 2
1 2 3 4 5 6 7 8 ... 30 31

Kommentare zu diesen Handbüchern

Kemybop 24 Feb 2024 | 22:03:22

Možná mimo téma, ale celodenní posouvání internetu vás oslabuje, pokud jde o zdraví a libido. Jak to přivést k mému příteli-to je pro mě problém..

Vafelnoe_polotno_uySi 14 Mar 2024 | 00:34:45

Вафельное полотно высшего качества для дома и промышленности Халаты одноразовые odnorazovie-halatyi.ru .

wow_boost_xzet 23 Mar 2024 | 07:26:23

Ultimate WoW Boosts: Fast-Tracking Your Gaming Success World of Warcraft Boosting Services wow-boost1.com .

santehnik_iqSl 26 Mar 2024 | 04:22:00

Все виды сантехнических услуг: качество, которому можно доверять вызвать сантехника на дом santehmontaz-2.ru .

santehnik_xyMl 27 Mar 2024 | 08:25:42

Услуги сантехника: монтаж отопительных систем без хлопот вызвать сантехника спб vizov-santekhnika-spb.ru .