BMW Radio and Information Systems Bedienungshandbuch PDF herunterladen (Seite 36)

Onboard com_puter/digital

clock

To change a programmed activation time:

Use the standard entry sequence described for activation times 1 and

to program the

new time.

The

LED

in the MID comes on to remind you that an activation time has been pro-

grammed.

The LED also flashes while the blower is operating. It goes out when the system is

deactivated.

To request display of activation time

-You can view the first activation time using the key sequence described on the pre-

vious page.

-To view the second activation time, use the same sequence, but select TIMER

The sytem activates (blower starts at selected time

LED

comes on) and deactivates

(LED

off) the heater at the programmed times.

After selecting the desired activation time press 1 TIMER

Programmed times remain stored in the system's memory until new times are entered.

Note:

Provided that the outside temperature is above 16" C/60°

the parked-car ventilation

will come on automatically at the preselected time.

Manual control

Available only with the ignition key in position 1

Select mode:

Press left side of key twice in suc-

cession.

To switch blower

onloff:

ImmHa

Press key.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 64 65

Keine Kommentare

BMW Radio and Information Systems Bedienungshandbuch Seite 36