See the information about the BMW Motorrad diagnostic system for all
further instructions.
Connect the BMW Motorrad battery charger.
BMW Motorrad battery charger (version for Europe without GB)
BMW Motorrad battery charger (GB/AUS/NZL version)
BMW Motorrad battery charger (Japan version)
BMW Motorrad battery charger (USA/CAN version)
Begin by switching on the BMW Motorrad diagnostic system and wait
for it to power up.
The *Start Diagnosis* screen appears
From this point on, follow the instructions issued by the BMW Motorrad
diagnostic system.
(-) Retrofit with CIP (Coding, Individualisation and Programming)
Battery is fully charged and battery charger is connected.
Do not attempt to perform work of any other kind on the motorcycle while
programming/coding is in progress.
Switch off all electrical consumers.
Begin by switching on the BMW Motorrad diagnostic system and wait
for it to power up.
The *Start Diagnosis* screen appears
From this point on, follow the instructions issued by the diagnostic system.
Perform diagnosis. Rectify faults, if found, before starting
programming/coding.
Start programming/coding with the CIP program and follow the instructions
issued by the diagnostic system.
Select the retrofit just completed from the range offered in CIP and step
through the rest of the procedure.
(-) Disconnecting BMW Motorrad diagnostic system from
motorcycle
Terminate the diagnosis session correctly and switch off the ignition.
BMW-Motorrad - 0450 - R 1200 GS, K25 31
Kommentare zu diesen Handbüchern