77 51 001 Installing LED auxiliary headlights (14 FRUs)+77 51 502Equipment trim-level variant:LED auxiliary headlightsNoteNot all the components conta
Place fairing bracket (6) in position (arrow).Install screw (5).Tightening torquesFuel tank with bracket to front frameM8 x 45 - 10.919 NmCheck the O-
See the information about the BMW Motorrad diagnostic system for allfurther instructions.Connect the BMW Motorrad battery charger.Workshop equipmentBM
Disconnect KOMET from the motorcycle and screw the cap onto thediagnosis plug.Disconnect the BMW Motorrad battery charger from the motorcycle.Finishin
(-) Installing brackets with LED auxiliary headlights on bothsidesRemove screws (1); these screws are no longer needed as longer screwswill be install
Continue routing actuating cable (1) down.(-) Releasing control unitOpen the clips (arrows) and swing up cover (1) and secure it so that itcannot clos
(-) Securing control unitInstall control unit (2).Lower cover (1) and engage the clips (arrows).(-) Installing wiring-harness adapter kit for LED auxi
The cable colours of the LED wiring-harness adapter kit do not match theoriginal colours of the auxiliary-headlight cables.Always connect brown to bro
(-) Routing wiring harnessSeat retainer (1) on cable duct (2).Technical dataFuse for auxiliaryheadlight7.5 ARoute cable (3) forward along wiring harne
(-) Securing cableSecure cable with cable tie (1).If the cables are too long use a cable tie (arrow) to secure the looped cableto wiring harness (2).(
(-) Wiring-harness routing for right LED auxiliary headlightRoute cable (1) along fairing carrier (2) toward the right LED auxiliaryheadlight and secu
(-) Installing fuel tankPush the fuel tank from behind into the rubber mounts on the frame. Makesure that no lines, hoses or Bowden cables are trapped
Kommentare zu diesen Handbüchern