BMW 740iL Reparaturanleitung PDF herunterladen (Seite 21)

Level Control Systems

EHC System Operation

A fully functional EHC system is controlled by one of three different modes of operation.

The operation mode is selected by the control module based on current conditions provid-

ed by the monitored input signals. The main modes of operation are:

• Pre-Run/Post-Run Mode

• Normal Mode

• Tailgate Mode

Two special operating modes are also included in the control module programming.

• New/replacement mode (pre ZCS encoded). This mode provides basic operation.

• Transport Mode - Transport mode is set at the factory and raises the vehicle 30mm to

prevent vehicle damage during transportation. It must be deactivated with the DIS/

MoDiC prior to customer delivery.

Pre-Run / Post-Run Mode

The Pre-Run mode is activated when the vehicle is parked and the control module is in the

sleep mode. Opening a door or the tailgate initiates a system wake up and the control mod-

ule comes on-line.

The control module performs a self-check of the control electronics and sensors. If no fault

is found, the system will check the ride height and institute a rapid regulation if the height

varies by more than 40mm.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 56 57

Keine Kommentare

BMW 740iL Reparaturanleitung Seite 21